Lime Filler
is a blend of natural hydraulic lime NHL 3.5 and carefully selected fine <1.5mm aggregate.
Used for repairing cracks and damage on internal lime plaster and external lime renders.
Also used as a finishing coat in the renovation and rehabilitation of exteriors on old masonry.
Use on old or new rendered surfaces as a filler layer in conservation and renovation. The use of natural lime binders, and their special composition, results in an excellent physical chemical behaviour and mechanical performance.
Its thixotropic adhesion and permeability properties means it is particularly suitable for use over old rendered substrates.
This product can be applied both manually and mechanically with a spraying or coating machine.
The features and benefits of Lime Filler
are:
Mechanical Characteristics:
Compressive strength Class CS I EN 1015-11
≥ 0.4 MPa at 28 days
Adhesion to brick and block / Modulus of fracture:
≥ 0,2 MPa / A and B EN 1015-12
Modulus of elasticity - 4000 N/mm2 BS 1881-5
Density - 1800 ± 50 kg/m3 EN 1015-10
Capillarity Class - <0,2 kg/m2 x min. 1/2 W2 EN 1015-18
Permeability to water vapour μ < 6 EN 1015-19
Dry-mixed, Ready-to-use (Just add Water), Natural Hydraulic Lime plaster/render available in 25kg paper bags.
NB. Every effort has been made to ensure the accuracy of the colour and texture of products on this website but due to the limitations of technology, we strongly recommend that sample products are purchased for testing in situ prior to the full order being placed.
NB. It is strongly recommended to use a competent builder/plasterer who is experienced in using specialist lime products with the requisite skills, technique and specialist qualifications and experience to carry out the job.
NB. Imported lime products are made from naturally occurring raw materials and on occasion may differ slightly from batch to batch in colour and texture. Every effort is made to produce a consistent product as part of the manufacturers own factory controlled procedures and quality control in line with EN Standards. It is strongly recommended to test a small amount of material, in situ, to assess suitability and performance and purchase adequate amounts of product from the same batch to fulfil any job. Chalk Down Lime Ltd can NOT guarantee the colour and texture of any imported lime products.
