ISONAT Multisol 140
is a natural render/plaster carrying wood fibre insulation board with a tongue and groove profile manufactured in accordance with EN 13171.
Designed both as an external sheathing board for timber frame constructions or for direct to masonry applications in internal (IWI) and external wall (EWI) insulation systems where the plaster or render is applied directly to the board and as an internal plaster carrying board for direct fixing to timber frames without the need for a supporting backer board.
ISONAT Multisol 140
is an easy and fast fixing woodfibre board with excellent insulating properties [0.042 W/(m*K)] in both summer and winter. High compressive strength, water vapour open (helps regulate the indoor climate of a building) and fire resistant.
NB. Supply and sale of components and products for various construction systems ordered from our website, over the phone or from our Yard does NOT constitute a specification.
NB. ISONAT Multisol 140 woodfibre boards are a low density woodfibre board that can damage easily in transit or when handled.
Manufactured in France, Isonat products are PEFC and FSC accredited, ecological friendly, recyclable from sustainably sourced waste wood. Part of the Saint-Gobain family since 2013 Isonat is the fasted growing manufacturer of woodfibre insulation in France with a 24hr production facility operating from their modern plant in Mably, France.
It is quite common for architects and designers to specify ISONAT Multisol
woodfibre boards in certain building applications and in combination with a separately specified finish or render system.
Technical Characterics:
Thermal Conductivity (lambda):0.042 W/(m*K)
Thickness: 40mm | 60mm
Size: 40mm = 1875mm x 575mm. (1.08m2)
Size: 60mm = 1872 x 572mm. (1.07m2)
Compressive Strength: 200 [kPa]
Water vapour diffusion resistance coefficient (µ) [-] 5
NB. Every effort has been made to ensure the accuracy of the colour and texture of products on this website but due to the limitations of technology, we strongly recommend that sample products are purchased for testing in situ prior to the full order being placed.
NB. It is strongly recommended to use a competent builder/plasterer/carpenter who is experienced in using specialist woodfibre products with the requisite skills, technique and specialist qualifications and experience to carry out the job.
NB. Imported woodfibre products are made from naturally occurring raw materials and on occasion may differ slightly from batch to batch in colour and texture. Every effort is made to produce a consistent product as part of the manufacturers own factory controlled procedures and quality control in line with EN Standards. It is strongly recommended to test a small amount of material, in situ, to assess suitability and performance and purchase adequate amounts of product from the same batch to fulfil any job. Chalk Down Lime Ltd can NOT guarantee the colour and texture of any imported woodfibre products.
